{"id":1178,"date":"2026-10-14T10:35:37","date_gmt":"2026-10-14T10:35:37","guid":{"rendered":"https:\/\/daix488.sg-host.com\/?post_type=product&p=1178"},"modified":"2026-10-15T10:51:08","modified_gmt":"2026-10-15T10:51:08","slug":"astm-f136-ti-6al-4v-eli-grade-23-titanium-plate-sheet","status":"publish","type":"product","link":"https:\/\/www.htn-ti.com\/de\/product\/astm-f136-ti-6al-4v-eli-grade-23-titanium-plate-sheet\/","title":{"rendered":"ASTM F136 Ti-6Al-4V ELI Grade 23 Titanium Plate & Sheet"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Product Overview<\/h2>\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

ASTM F136 Ti-6Al-4V ELI (commonly called Grade 23) titanium plate and sheet are wrought, annealed alpha-beta titanium alloy flat products for surgical implant manufacture, UNS R56401. ELI means extra-low interstitial. Compared with conventional Ti-6Al-4V, tighter limits on oxygen, iron and other interstitial elements improve fracture toughness, fatigue-crack-growth resistance and low-temperature toughness while retaining high specific strength, corrosion resistance and good biocompatibility.<\/p>

Flat product may be supplied as hot-rolled plate, cold-rolled sheet or contract-finished flat stock. Typical uses include orthopedic fixation plates, cranio-maxillofacial and spinal implant components, joint-system parts, surgical instruments and precision medical parts. ASTM F136 specifies medical-alloy raw material; the finished implant still requires device-level validation for actual thickness, rolling direction, microstructure, surface integrity, fatigue, cleaning, sterilization, biological evaluation and applicable regulation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t
<\/colgroup>
Specification<\/strong><\/td>Cold-Rolled Titanium Sheet<\/strong><\/td>Hot-Rolled Titanium Plate<\/strong><\/td><\/tr>
Standard<\/strong><\/td>ASTM F136<\/td><\/tr>
Grades<\/strong><\/td>Gr23<\/td><\/tr>
Thickness<\/strong><\/td>0.3\u20134.75 mm<\/td>5\u201360 mm; Customizable up to 100 mm<\/td><\/tr>
Standard Stock Thicknesses<\/strong><\/td>0.5 \/ 0.6 \/ 0.8 \/ 1.0 \/ 1.5 \/ 2.0 \/ 2.5 \/ 3.0 \/ 4.0mm<\/td>5 \/ 6 \/ 8 \/ 10 \/ 12 \/ 15 \/ 20 \/ 25 \/ 30 \/ 35 \/ 40 \/ 50 \/ 60 mm<\/td><\/tr>
Width<\/strong><\/td>400\u20131200 mm<\/td>400\u20132000 mm<\/td><\/tr>
Length<\/strong><\/td>1000\u20133000 mm<\/td>1000\u20136000 mm<\/td><\/tr>
Note<\/strong><\/td>Sheet Thickness \u2264 4.75 mm<\/td>Medical Titanium Plate & Sheet Typical thickness 0.5\u201320 mm; width \u22641200 mm; polished or pickled surfaces available.<\/td><\/tr><\/tbody><\/table><\/div>

Medical-use boundary:<\/strong> ASTM F136-compliant plate and sheet are medical-device raw material, not an approved finished implant. The device manufacturer remains responsible for design, forming\/joining, surface treatment, cleaning, sterilization, biological evaluation, risk management and regulatory compliance.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Main Characteristics<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
  • Medical Ti-6Al-4V ELI:<\/strong> Tight control of oxygen, iron, carbon, nitrogen and hydrogen improves damage tolerance while preserving the high strength of Ti-6Al-4V, suiting devices sensitive to fatigue, bending and fracture.<\/li>
  • Controlled alpha-beta chemistry:<\/strong> Aluminum stabilizes alpha and vanadium stabilizes beta. Al, V, interstitials and residual elements require heat-specific control for consistent strength, ductility, microstructure and rolling\/forming response.<\/li>
  • Good biocompatibility:<\/strong> A stable TiO2 passive film and extensive clinical use support its role as a common implant material. The finished device still requires biological evaluation under applicable regulations and standards such as ISO 10993.<\/li>
  • Good corrosion resistance:<\/strong> Performance is generally excellent in saline, body fluids and many chloride environments, but fretting, crevices, dissimilar-metal coupling, fluoride media and surface contamination require device-level evaluation.<\/li>
  • Weldable with strict shielding:<\/strong> Qualified laser, electron-beam, GTAW\/TIG or resistance processes may be used. The pool, back side and hot heat-affected zone require full inert-gas protection. Sheet welding must also control heat input, distortion and residual stress.<\/li>
  • High strength with limited room-temperature formability:<\/strong> Plate and sheet can be sheared, stamped, bent and formed to a limited extent, but have less forming margin and greater springback than unalloyed titanium. Minimum bend radius, bend orientation and forming temperature depend on thickness, annealed condition, grain\/texture and surface quality; complex forming normally uses qualified warm or hot-forming procedures.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Chemical Composition<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    The following mass-percent limits are commonly applied to ASTM F136 Ti-6Al-4V ELI (UNS R56401). The current active edition is ASTM F136 . Formal purchasing and acceptance are governed by the contract edition, official ASTM text and original mill report. A hydrogen note applies to material 0.813 mm (0.032 in) and under, as shown below.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t\t\t\t\t\t
    Element<\/strong><\/td>ASTM F136 Ti-6Al-4V ELI requirement<\/strong><\/td><\/tr>
    Nitrogen, N<\/strong><\/td>\u22640.05%<\/td><\/tr>
    Carbon, C<\/strong><\/td>\u22640.08%<\/td><\/tr>
    Hydrogen, H<\/strong><\/td>\u22640.0125%*<\/td><\/tr>
    Iron, Fe<\/strong><\/td>\u22640.25%<\/td><\/tr>
    Oxygen, O<\/strong><\/td>\u22640.13%<\/td><\/tr>
    Aluminum, Al<\/strong><\/td>5.5-6.5%<\/td><\/tr>
    Vanadium, V<\/strong><\/td>3.5-4.5%<\/td><\/tr>
    Residual elements, each<\/strong><\/td>\u22640.10%<\/td><\/tr>
    Residual elements, total<\/strong><\/td>\u22640.40%<\/td><\/tr>
    Titanium, Ti<\/strong><\/td>Balance<\/td><\/tr><\/tbody><\/table><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Technical references: ASTM F136 official scope, established technical data from ASTM F136-13(2021)e1, and published producer data for Ti-6Al-4V ELI flat products.<\/p>

    • * For material 0.813 mm (0.032 in) and under, hydrogen may be up to 0.0150%; the contract-specified ASTM edition governs.<\/li>
    • Aluminum and vanadium:<\/strong> Al is 5.5-6.5% and V is 3.5-4.5%, together producing a heat-treatable alpha-beta microstructure. Chemical homogeneity, melting and thermomechanical processing affect microstructure and final properties.<\/li>
    • Oxygen, iron and interstitials:<\/strong> Lower O, Fe, C, N and H limits improve toughness and fatigue-crack-growth behavior. For material 0.813 mm (0.032 in) and under, the standard note permits hydrogen up to 0.0150%; other thicknesses commonly use 0.0125% maximum. Confirm the applicable contract edition and actual thickness.<\/li>
    • Residual elements:<\/strong> Each and total limits must be controlled. The material report must correspond to the heat; testing only Al and V does not satisfy the complete chemistry requirement.<\/li>
    • Titanium content:<\/strong> The specification states Titanium: Balance. A nominal grade or medical-grade claim does not replace heat-specific analysis, the material report and contract testing.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      Mechanical Properties<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      ASTM F136 specifies room-temperature tensile requirements for annealed wrought Ti-6Al-4V ELI. Common annealed plate-and-sheet reference minimums are 860 MPa ultimate tensile strength, 795 MPa 0.2% offset yield strength and 10% elongation. Formal acceptance must follow product thickness, sampling direction, specimen form, gauge length and the official table in the contract edition; applicable thicknesses also require the specified bend test.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t\t\t\t\t\t
      Property<\/strong><\/td>ASTM F136 annealed reference<\/strong><\/td>Note<\/strong><\/td><\/tr>
      Ultimate tensile strength<\/strong><\/td>\u2265860 MPa<\/td>Specified minimum<\/td><\/tr>
      0.2% yield strength<\/strong><\/td>\u2265795 MPa<\/td>Specified minimum<\/td><\/tr>
      Elongation<\/strong><\/td>\u226510%<\/td>Gauge length\/specimen and thickness requirements follow the contract edition<\/td><\/tr><\/tbody><\/table><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      ASTM F136 Ti-6Al-4V ELI Annealed Plate & Sheet Reference Requirements<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t\t\t\t\t\t
      Property<\/strong><\/td>Ti-6Al-4V ELI annealed reference<\/strong><\/td><\/tr>
      Ultimate tensile strength<\/strong><\/td>Minimum 860 MPa<\/td><\/tr>
      0.2% yield strength<\/strong><\/td>Minimum 795 MPa<\/td><\/tr>
      Elongation<\/strong><\/td>Minimum 10%<\/td><\/tr>
      Elastic modulus<\/strong><\/td>Typical approx. 105-116 GPa<\/td><\/tr><\/tbody><\/table><\/div>

      Important:<\/strong> Mechanical properties must be applied with thickness, sampling location and direction, specimen form, gauge length, annealed condition and the official table. Applicable thicknesses also require the specified bend test. Generic web data cannot replace contract acceptance, and ASTM F136 raw-material compliance alone does not approve a finished implant.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t

      HTN Supply and Quality Documentation<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      HTN organizes ASTM F136 Ti-6Al-4V ELI (Grade 23) medical titanium plate and sheet supply to customer purchase requirements. Material is produced by qualified titanium-mill resources. Original mill reports, heat\/plate traceability, chemistry and mechanical records can be supplied as agreed. HTN reviews the standard edition, thickness, width, length, tolerances, condition, surface, flatness, rolling direction, edges and packaging, and can arrange independent retesting, microstructure examination, ultrasonic or liquid-penetrant testing, cut-to-size processing, clean packaging and third-party inspection.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t

      Typical Applications<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      • raw material for orthopedic trauma fixation plates, bone plates and related load-bearing implant components;<\/li>
      • cranio-maxillofacial reconstruction plates, spinal implant components and joint-system parts;<\/li>
      • dental, surgical-instrument and other medical-device components requiring high-strength thin sections;<\/li>
      • flat stock for precision stamping, bending, machining or hybrid additive\/subtractive manufacturing;<\/li>
      • medical-device parts requiring high specific strength, good damage tolerance and corrosion resistance;<\/li>
      • hot-rolled plate, cold-rolled sheet, ground plate and cut-to-size flat stock supplied to customer drawings;<\/li>
      • medical-device research, prototypes and custom implant material;<\/li>
      • international projects when ISO 5832-3, regulatory and customer supplementary requirements are also met.<\/li><\/ul>

        Application boundary:<\/strong> ASTM F136 Ti-6Al-4V ELI plate and sheet are raw material for surgical implant applications, not an approved finished implant. The final device must separately meet applicable regulations, design validation, fatigue evaluation, biological evaluation, cleaning, sterilization and traceability requirements.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t
        Request a Quote<\/div>\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Fill in the form below and our team will be happy to assist you<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t\t\t\t
        \t\t
        \n\t\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t\t\t
        \n\t\t\t\n\t\t\t\n\t\t\t\n\n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t
        \n\t\t\t\t\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t