{"id":1179,"date":"2026-10-14T10:35:40","date_gmt":"2026-10-14T10:35:40","guid":{"rendered":"https:\/\/daix488.sg-host.com\/?post_type=product&p=1179"},"modified":"2026-10-15T10:51:03","modified_gmt":"2026-10-15T10:51:03","slug":"astm-f1472-ti-6al-4v-grade-5-titanium-plate-sheet","status":"publish","type":"product","link":"https:\/\/www.htn-ti.com\/de\/product\/astm-f1472-ti-6al-4v-grade-5-titanium-plate-sheet\/","title":{"rendered":"ASTM F1472 Ti-6Al-4V Grade 5 Titanium Plate & Sheet"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Product Overview<\/h2>\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

ASTM F1472 titanium plate and sheet are wrought, annealed Ti-6Al-4V alpha-beta alloy flat products for surgical implant manufacture, UNS R56400, commercially known as Grade 5. They combine high specific strength, good corrosion resistance and established forming\/machining capability. This is conventional Ti-6Al-4V, not the ELI \/ Grade 23 alloy specified by ASTM F136.<\/p>

Products may be supplied as hot-rolled plate, cold-rolled sheet, strip or contract-finished flat stock. Typical uses include orthopedic fixation plates, cranio-maxillofacial and spinal implant components, joint-system parts, surgical instruments and precision medical parts. ASTM F1472 specifies raw-material chemistry, mechanical and metallurgical requirements; the finished implant still requires device-level validation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t
<\/colgroup>
Specification<\/strong><\/td>Cold-Rolled Titanium Sheet<\/strong><\/td>Hot-Rolled Titanium Plate<\/strong><\/td><\/tr>
Standard<\/strong><\/td>ASTM F1472<\/td><\/tr>
Grades<\/strong><\/td>Ti-6Al-4V<\/td><\/tr>
Thickness<\/strong><\/td>0.3\u20134.75 mm<\/td>5\u201360 mm; Customizable up to 100 mm<\/td><\/tr>
Standard Stock Thicknesses<\/strong><\/td>0.5 \/ 0.6 \/ 0.8 \/ 1.0 \/ 1.5 \/ 2.0 \/ 2.5 \/ 3.0 \/ 4.0mm<\/td>5 \/ 6 \/ 8 \/ 10 \/ 12 \/ 15 \/ 20 \/ 25 \/ 30 \/ 35 \/ 40 \/ 50 \/ 60 mm<\/td><\/tr>
Width<\/strong><\/td>400\u20131200 mm<\/td>400\u20132000 mm<\/td><\/tr>
Length<\/strong><\/td>1000\u20133000 mm<\/td>1000\u20136000 mm<\/td><\/tr>
Note<\/strong><\/td>Sheet Thickness \u2264 4.75 mm<\/td>Medical Titanium Plate & Sheet Typical thickness 0.5\u201320 mm; width \u22641200 mm; polished or pickled surfaces available.<\/td><\/tr><\/tbody><\/table><\/div>

Medical-use boundary:<\/strong> ASTM F1472-compliant plate and sheet are medical-device raw material, not an approved finished implant. The device manufacturer remains responsible for design, forming\/joining, surface treatment, cleaning, sterilization, biological evaluation, risk management and regulatory compliance.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Main Characteristics<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
  • Medical conventional Ti-6Al-4V:<\/strong> Combines high specific strength, corrosion resistance and extensive clinical and engineering use. F1472 permits higher oxygen, iron and hydrogen limits than ASTM F136 Ti-6Al-4V ELI; the two specifications and material grades must not be labeled interchangeably.<\/li>
  • Controlled alpha-beta chemistry:<\/strong> Aluminum stabilizes alpha and vanadium stabilizes beta. Al, V, interstitial elements, yttrium and residual elements require heat-specific control for consistent strength, ductility, microstructure and rolling\/forming response.<\/li>
  • Good biocompatibility:<\/strong> A stable TiO2 passive film and extensive clinical use support its role as a common implant material. The finished device still requires biological evaluation under applicable regulations and standards such as ISO 10993.<\/li>
  • Good corrosion resistance:<\/strong> Performance is generally excellent in saline, body fluids and many chloride environments, but fretting, crevices, dissimilar-metal coupling, fluoride media and surface contamination require device-level evaluation.<\/li>
  • Weldable with strict shielding:<\/strong> Qualified laser, electron-beam, GTAW\/TIG or resistance processes may be used. The pool, back side and hot heat-affected zone require full inert-gas protection. Sheet welding must also control heat input, distortion and residual stress.<\/li>
  • High strength with limited room-temperature formability:<\/strong> Plate and sheet can be sheared, stamped, bent and formed to a limited extent, but have less forming margin and greater springback than unalloyed titanium. Bend radius, orientation and forming temperature depend on thickness, annealed condition, texture and surface quality; complex forming normally uses qualified warm or hot-forming procedures.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Chemical Composition<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    The following mass-percent limits are commonly applied to ASTM F1472 Ti-6Al-4V (UNS R56400). Formal purchasing and acceptance are governed by the contract edition, official ASTM text and original mill report:<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t\t\t\t\t\t
    Element<\/strong><\/td>ASTM F1472 Ti-6Al-4V requirement<\/strong><\/td><\/tr>
    Nitrogen, N<\/strong><\/td>\u22640.05%<\/td><\/tr>
    Carbon, C<\/strong><\/td>\u22640.08%<\/td><\/tr>
    Hydrogen, H<\/strong><\/td>\u22640.015%<\/td><\/tr>
    Iron, Fe<\/strong><\/td>\u22640.30%<\/td><\/tr>
    Oxygen, O<\/strong><\/td>\u22640.20%<\/td><\/tr>
    Aluminum, Al<\/strong><\/td>5.5-6.75%<\/td><\/tr>
    Vanadium, V<\/strong><\/td>3.5-4.5%<\/td><\/tr>
    Yttrium, Y<\/strong><\/td>\u22640.005%<\/td><\/tr>
    Residual elements, each<\/strong><\/td>\u22640.10%<\/td><\/tr>
    Residual elements, total<\/strong><\/td>\u22640.40%<\/td><\/tr>
    Titanium, Ti<\/strong><\/td>Balance<\/td><\/tr><\/tbody><\/table><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Technical references: ASTM F1472 official scope and public abstract, plus producer data for Ti-6Al-4V \/ UNS R56400 flat products.<\/p>

    • Aluminum and vanadium:<\/strong> Al is 5.5-6.75% and V is 3.5-4.5%, together producing a heat-treatable alpha-beta microstructure. Chemical homogeneity, melting and thermomechanical processing affect microstructure and final performance.<\/li>
    • Interstitials and iron:<\/strong> O, Fe, C, N and H affect strength, ductility, toughness and hydrogen-embrittlement risk. F1472 conventional Ti-6Al-4V limits differ from F136 ELI; procurement, reports and identification must clearly distinguish them.<\/li>
    • Yttrium and residuals:<\/strong> Yttrium is limited to 0.005% maximum; each and total residual-element limits must follow the standard. The report must correspond to the heat and include required chemistry, not only Al and V.<\/li>
    • Titanium content:<\/strong> The specification states Titanium: Balance. A nominal grade or medical-grade claim does not replace heat-specific analysis, the material report and contract testing.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      Mechanical Properties<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      ASTM F1472 specifies room-temperature tensile requirements for annealed wrought Ti-6Al-4V plate, sheet and strip. A common public reference baseline is approximately 895 MPa ultimate tensile strength and 825 MPa 0.2% yield strength, with 8-10% minimum elongation depending on thickness and orientation. Formal acceptance must use the applicable thickness\/orientation table in the contract edition; sheet, strip and plate also require bend testing where applicable.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t\t\t\t\t\t
      Property<\/strong><\/td>ASTM F1472 annealed flat-product reference minimum<\/strong><\/td>Note<\/strong><\/td><\/tr>
      Ultimate tensile strength<\/strong><\/td>Approx. 895 MPa<\/td>Official value follows thickness\/orientation table<\/td><\/tr>
      0.2% yield strength<\/strong><\/td>Approx. 825 MPa<\/td>Official value follows thickness\/orientation table<\/td><\/tr>
      Elongation<\/strong><\/td>8-10%<\/td>Minimum depends on thickness, orientation and specimen<\/td><\/tr><\/tbody><\/table><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      ASTM F1472 Ti-6Al-4V Annealed Plate & Sheet Reference Requirements<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t\t\t\t\t\t
      Property<\/strong><\/td>Ti-6Al-4V annealed reference<\/strong><\/td><\/tr>
      Ultimate tensile strength<\/strong><\/td>Common reference minimum approx. 895 MPa<\/td><\/tr>
      0.2% yield strength<\/strong><\/td>Common reference minimum approx. 825 MPa<\/td><\/tr>
      Elongation<\/strong><\/td>Common minimum approx. 8-10%, by thickness\/orientation<\/td><\/tr>
      Elastic modulus<\/strong><\/td>Typical approx. 105-116 GPa<\/td><\/tr><\/tbody><\/table><\/div>

      Important:<\/strong> Mechanical properties must be applied with thickness, sampling location and orientation, specimen form, gauge length, annealed condition and the official table; applicable sheet, strip and plate also require the specified bend test. This table is for product presentation only and does not replace contract acceptance or approve a finished implant.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t

      HTN Supply and Quality Documentation<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      HTN organizes ASTM F1472 Ti-6Al-4V (Grade 5) medical titanium plate and sheet supply to customer purchase requirements. Material is produced by qualified titanium-mill resources. Original mill reports, heat\/plate traceability, chemistry, mechanical and microstructure records can be supplied as agreed. HTN reviews standard edition, thickness, width, length, tolerances, annealed condition, surface, flatness, rolling direction, edges and packaging, and can arrange independent retesting, ultrasonic or liquid-penetrant testing, cut-to-size processing, clean packaging and third-party inspection.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t

      Typical Applications<\/h3>\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      • raw material for orthopedic trauma fixation plates, bone plates and related load-bearing implant components;<\/li>
      • cranio-maxillofacial reconstruction plates, spinal implant components and joint-system parts;<\/li>
      • dental, surgical-instrument and other medical-device components requiring high-strength thin sections;<\/li>
      • flat stock for precision stamping, bending, machining or hybrid additive\/subtractive manufacturing;<\/li>
      • medical-device parts requiring high specific strength, good damage tolerance and corrosion resistance;<\/li>
      • hot-rolled plate, cold-rolled sheet, ground plate and cut-to-size flat stock supplied to customer drawings;<\/li>
      • medical-device research, prototypes and custom implant material;<\/li>
      • international projects when ISO 5832-3, regulatory and customer supplementary requirements are also met.<\/li><\/ul>

        Application boundary:<\/strong> ASTM F1472 Ti-6Al-4V plate and sheet are raw material for surgical implant manufacture, not an approved finished implant. The final device must separately meet applicable regulations, design validation, fatigue evaluation, biological evaluation, cleaning, sterilization and traceability requirements.<\/p><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t
        Request a Quote<\/div>\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Fill in the form below and our team will be happy to assist you<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t\t\t\t
        \t\t
        \n\t\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t\t\t
        \n\t\t\t\n\t\t\t\n\t\t\t\n\n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t
        \n\t\t\t\t\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t