Titanium Bar Manufacturer for Medical & Industrial Applications
Shaanxi Huatainuo Metal manufactures titanium bars and rods in commercially pure titanium and titanium alloys for medical, chemical processing, marine, and industrial applications. Our scope covers Grades 1 through 5 and Grade 23, supplied to ASTM B348, ASTM F136, and equivalent standards.
This page helps you identify the right grade for your application — and links directly to each product page for specifications, size ranges, and RFQ submission.
How to Choose the Right Titanium Bar Grade
Different grades suit different environments. The table below compares our main products by performance, standard, and typical use case — so you can shortlist the right material before requesting a quote.
| Grade |
Standard |
Key Properties |
Best For |
Product Link |
| GR1 (CP Ti) |
ASTM B348 |
Highest ductility, excellent corrosion resistance, best formability |
Chemical processing piping, seawater desalination components, dental implant blanks |
View GR1 Titanium Bar → |
| GR2 (CP Ti) |
ISO 5832-2 |
Better strength than GR1, excellent weldability, biocompatible |
Surgical instruments, medical equipment housings, heat exchangers, offshore drilling parts |
View GR2 Titanium Bar → |
| GR5 / Ti-6Al-4V |
ASTM B348 / AMS 4928 / AMS 4967 |
Highest strength among common grades, service temp. up to 400°C |
Aerospace fastener blanks, structural parts, bone screw blanks, industrial shafts |
View GR5 Titanium Bar → · AMS 4967 Version → |
| GR23 / Ti-6Al-4V ELI |
ASTM F136 / ISO 5832-3 |
Lower interstitial content, higher ductility & fatigue strength, biocompatible |
Orthopedic implants, spinal rods, hip prostheses, fracture fixation systems |
View GR23 ELI Bar → · ISO 5832-11 Version → |
| Ti6246 |
AMS 4981 |
High strength at elevated temperature, excellent fatigue resistance |
Aerospace engine discs, compressor blades, critical structural frames |
View Ti6246 Bar → |
Not sure which grade to specify? Our technical team can assist with material selection based on your application environment, load conditions, and regulatory requirements. Contact us for a recommendation →
Application Scenarios by Industry
Medical & Implant Manufacturing
Recommended grades: GR2, GR5, GR23 (ELI)
For implantable devices, biocompatibility and fatigue strength are the primary criteria. GR23 (Ti-6Al-4V ELI) is the preferred choice for load-bearing implants due to its ultra-low interstitial content and superior fracture toughness. GR5 is widely used for instrument components and non-implantable surgical tools.
Supplied to: ASTM F136, ISO 5832-3, ISO 5832-11. Mill test certificates (EN 10204 3.1) available.
Aerospace Applications
Recommended grades: GR5 (Ti-6Al-4V), Ti6246
Aerospace applications prioritize strength-to-weight ratio and high-temperature performance. Ti-6Al-4V (AMS 4967) covers most structural and fastener applications; Ti6246 (AMS 4981) is specified where operating temperatures exceed 400°C.
Chemical Processing & Industrial
Recommended grades: GR1, GR2
CP titanium grades 1 and 2 offer excellent resistance to oxidizing acids, chlorides, and seawater — without the cost of alloy grades. GR1 provides the best formability for fabricated components; GR2 offers a balance of corrosion resistance and strength for pressure equipment.
Marine Engineering
Recommended grades: GR2, GR5
Both grades offer strong seawater corrosion resistance. GR2 is preferred for non-structural, corrosion-critical components; GR5 is chosen where structural loading demands higher tensile strength.
Titanium Bar Size Ranges & Manufacturing Capabilities
We manufacture titanium bars and rods across a wide size range to support both prototype and production quantities.
| Parameter |
Round Bar |
Flat Bar |
Hex Bar |
| Diameter / Width |
Ø6–300 mm (0.24–11.8 inch) |
5×10 mm – 100×200 mm |
8 mm – 200 mm |
| Length |
500 mm – 6,000 mm (random or cut-to-length) |
Up to 6,000 mm |
Up to 6,000 mm |
| Surface Conditions |
Peeled, ground, polished, as-forged |
Milled, ground |
Ground |
| Tolerance |
Per ASTM B348 / customer drawing |
Per standard or custom |
Per standard or custom |
Specific tolerances are confirmed during order review. Custom sizes and non-standard cross-sections are available on request.
Manufacturing processes available:
- Hot rolled bar
- Forged bar (improved grain structure, better fatigue resistance)
- Cold-drawn bar (tight dimensional tolerance, smooth surface)
- Vacuum Arc Remelting (VAR)
- Multiple vacuum melting
- Precision forging
- Cut-to-length with ±0.5 mm tolerance
Quality Control & Material Traceability
Every titanium bar we supply is backed by full material traceability and Complete material traceability and inspection documentation are available for each batch.
Standard QC procedures:
- Chemical composition (OES spectrometry)
- Mechanical testing: tensile strength, yield strength, elongation, hardness
- Dimensional inspection per ASTM B348 or customer drawing
- Surface condition verification (peeled, ground, polished)
- Ultrasonic testing (UT) available on request
Certifications available:
- EN 10204 3.1 Mill Test Certificate
- ISO 9001:2015 and ISO 13485:2016 certified production
- Material heat number traceability throughout batch
Why Source Titanium Bars from Us
- Vertically integrated manufacturing — from raw titanium sponge to finished bar, in-house
- Medical and industrial supply chain experience — ISO 13485-certified quality management system supporting medical-grade titanium material production.
- Application-matched grade support — our engineers assist with specification review and material selection
- Flexible order quantities — small batch for R&D, full production run for OEM supply
- Export documentation support — EN 10204 3.1 certificates, CoC, and customs documentation
Request Specifications or a Quotation
If you are sourcing a
titanium bar manufacturer for medical, aerospace, or industrial projects, submit your requirements below. Please include:
- Material grade or application description
- Diameter range and length
- Required surface condition and tolerance
- Quantity and delivery timeline
Request a Custom Quote →
