Titanium Sheets & Plates

Titanium Sheet & Plate Manufacturer | CP Titanium and Ti-6Al-4V Alloy

Shaanxi Huatainuo Metal manufactures commercially pure titanium sheets and titanium alloy plates for aerospace, medical, chemical processing, marine, and industrial applications. Products are supplied with controlled chemical composition, mechanical properties, surface finish, and full material traceability. Our production covers CP titanium sheet (Grade 1–4) and titanium alloy plates, manufactured in accordance with international standards and manufactured according to customer drawings, specifications, and application requirements. This page outlines our capabilities as a titanium plate manufacturer, including available grades, size ranges, and application-driven recommendations to help you select the right product before submitting an RFQ.

Related materials: Titanium Bar, Titanium Wire, Titanium Tube

Titanium Sheet & Plate Product Range — Grade Comparison

The table below compares our five titanium sheet/plate products by grade, standard, and confirmed size range, so you can match the right material to your industry and application before requesting a quote. Click any product name to view full specifications.

Product	Grade	Standard	Size Range (T × W × L)	Key Characteristics	Best Suited For
Gr2 Titanium Sheet ASTM F67 (also covers Gr1)	Gr1 / Gr2 (CP)	ASTM F67, ISO 5832-2	0.6–1.0mm T × 280–350mm W × 1000–2000mm L	Highest ductility & formability among CP grades; excellent corrosion resistance	Cranial/skull mesh plates, implant-grade thin sheet, general medical fabrication
Gr3 Titanium Plates ASTM F67 (also covers Gr4, Gr5 ELI)	Gr3 / Gr4 / Gr5 ELI	ASTM F67 / F136, ISO 5832-2/3	0.6–6.5mm T × 300–400mm W × 1000–1200mm L	Higher strength than Gr1/Gr2 CP grades; suitable for internal fixation under load	Bone lock plates, internal bone fixation, orthopedic fixation devices
Gr4 Titanium Plate ISO 5832-2/3 (custom Gr3/Gr4/Gr5/ELI)	Gr3 / Gr4 / Gr5 / ELI	ASTM F136/F67, ISO 5832-2/3	Gr5 & ELI: 1.0–6.0mm T; Gr3 & Gr4: 8.0–12.0mm T (300–400mm W × 1000–1200mm L)	Hot-rolled, custom-cut formats for non-standard part geometries	Aerospace structural components, custom medical & special-purpose parts
Ti6Al4V (Grade 5) Titanium Plate ASTM F136	Gr5 / Gr5 ELI	ASTM F136, ISO 5832-3	1.0–12.0mm T × 300–1000mm W × 1000–2000mm L	High strength-to-weight ratio; stable performance for load-bearing implants	Orthopedic, dental & surgical implant components requiring higher load capacity
Ti6Al4V ELI Titanium Sheet ISO5832-3	Gr23 (ELI) / Gr5	ASTM F136, ISO 5832-3	1.2–20mm T × 300–500mm W × 1000–1200mm L	Widest thickness range in our plate line; extra-low interstitials for fracture-critical use	Joint reconstruction, trauma plates, thicker structural implant components

All sizes above are taken directly from current product specifications; please confirm exact thickness/width/length for your project with our sales team, as availability may vary by batch.

Titanium Sheet & Plate Manufacturing Capabilities

As an experienced titanium sheet manufacturer, we provide flat-rolled titanium products with controlled thickness, surface quality, and mechanical performance. Production scope includes:

Cold rolled and hot rolled titanium sheets
Titanium plates for structural and pressure applications
Precision-cut sheet formats based on drawings
Surface finishing: Pickled, polished, mill finish, blasted and customized finishes according to customer requirements.

Supply formats:

Sheet (thin gauge, ~0.6–1.0mm — see Gr1/Gr2 above)
Plate (medium to thick sections, up to 20mm — see Gr23 ELI above)
Custom cut sizes upon request

Our manufacturing process ensures stable material performance for forming, welding, and long-term service environments. Titanium sheets are typically used for thinner flat products requiring forming and fabrication, while titanium plates are selected for thicker structural and pressure-related applications.

Available Grades & Standards

We supply both CP titanium sheet and titanium alloy plates to meet different performance requirements.

Material Grades

CP Titanium Grade 1 / 2 / 3 / 4
Ti-6Al-4V (Grade 5)
Ti-6Al-4V ELI (Grade 23, for medical applications)

Common standards

ASTM B265 — Titanium and Titanium Alloy Strip, Sheet, and Plate

Medical

ASTM F67 — CP titanium for surgical implant applications
ASTM F136 — Ti-6Al-4V ELI implant alloy
Other international standards available upon request

Material selection is supported based on corrosion resistance, formability, and mechanical strength requirements — see the comparison table above for grade-by-grade guidance.

Application-to-Grade Quick Reference

Use the table below to jump directly from your industry or use case to the recommended grade and product page.

Industry / Scenario	Typical Use Cases	Recommended Product
Chemical Processing & Desalination	Equipment linings, heat exchanger plates, desalination systems, environmental protection equipment	Gr2 Titanium Sheet (CP, ASTM F67)
Medical — Cranial & Mesh Implants	Skull plates, cranial reconstruction, mesh implants	Gr1 / Gr2 Titanium Sheet
Medical — Orthopedic Fixation	Bone plates, internal fixation, bone lock plates	Gr3 / Gr4 / Gr5 ELI Titanium Plates
Medical — Joint & Trauma	Joint reconstruction, trauma plates, thicker load-bearing implant components	Ti-6Al-4V ELI Titanium Sheet
Medical — Surgical & Dental Implants	Orthopedic, dental and surgical device manufacturing requiring higher strength	Ti6Al4V (Grade 5) Titanium Plate
Aerospace & Custom Structural Parts	Load-bearing aerospace components, custom-cut special-purpose plates	Gr4 Titanium Plate (custom Gr3/Gr4/Gr5/ELI)
Industrial Equipment	High-stress, corrosion-resistant industrial parts	Gr4 Titanium Plate

Titanium alloy plates such as Ti-6Al-4V provide higher strength compared to CP grades while maintaining good corrosion resistance; CP Grade 2 remains the most commonly specified sheet for general industrial use.

Quality Control & Material Traceability

All titanium sheets and plates are produced under controlled processes to ensure consistency and compliance. Quality control includes:

Chemical composition verification
Mechanical property testing
Surface inspection
Dimensional tolerance control
Heat number traceability

Mill test certificates (EN 10204 3.1) and inspection documentation are available upon request.

Customization & Project Support

We support project-based procurement with flexible manufacturing capabilities. Available customization options:

Thickness and size customization (see size ranges in the comparison table above)
Surface condition requirements (polished, pickled, hot- or cold-rolled surface)
Application-specific material selection
Cutting and pre-processing services

Technical drawings and application details are recommended for accurate quotation and production alignment.

Why Choose Us as Your Titanium Sheet Manufacturer

Stable production capacity for industrial and medical supply
Experience in Experience in corrosion-resistant and high-performance applications
Flexible customization based on project requirements
Reliable documentation and export support
Aerospace: aircraft structures engine components lightweight parts
Medical: implant components surgical instruments
Chemical: heat exchangers reactors corrosion-resistant equipment
Marine: seawater equipment offshore components

We focus on providing consistent material quality to support downstream fabrication and long-term service performance.

Request Titanium Sheet & Plate Specifications

If you are sourcing a titanium sheet manufacturer or titanium plate manufacturer, please contact us with your required grade, dimensions, and application details. Request a Quotation for Titanium Sheets & Plates Our team will respond with material recommendations and quotation support.

No products in this category